Doing business with DNREC during the coronavirus period. More Info
Title V is an air pollution control program, based on federal law, designed to standardize air quality permits and the permitting process for major sources of air emissions across the country.
The program name, “Title V,” comes from Title V of the 1990 Federal Clean Air Act Amendments, which required that the U.S. Environmental Protection Agency (EPA) to establish a national operating program. EPA adopted regulations (Title 40 of the Code of Federal Regulations, Chapter 1, Part 70) which required states and local permitting authorities to develop and submit a federally enforceable operating permit program for EPA approval.
The State of Delaware developed Section 1130 of the state Clean Air Act regulations (7 DE Admin. Code 1130) which outlines Delaware’s Title V Permit procedures and requirements.
Title V only applies to “major sources.” The EPA defines a major source as a facility that emits, or has the potential to emit (PTE) any criteria pollutant or hazardous air pollutant (HAP) at levels equal to or greater than the Major Source Thresholds (MST) set in the Clean Air Act. The Major Source Threshold for criteria pollutants may vary depending on the attainment status (e.g. severe, serious, extreme) of the geographic area and the Criteria Pollutant or HAP in which the facility is located.
|Volatile Organic Compounds||Nitrogen Oxide||Carbon Monoxide||Sulfer||Particulates||Hazardous Air Pollutants||Other|
|Measured in tons per year. The threshold of 10 tons/year for HAPs is for a single HAP. The annual total threshold for all HAPs in 25 tons/year.|
Title V also requires that facilities subject to the program pay an annual fee sufficient to cover all reasonable direct and indirect costs associated with administering the Title V permit program. The fees are reviewed on a regular basis by the Title V Operating Permit Program Advisory Committee, generally known as the Title V Fee Committee.
Right-click and download documents as needed. Please read the instructions.
|Form Name||WORD Version||PDF Version|
|Manufacturing or Processing Operations||AQM-1001B||AQM-1001B|
|Incinerators and/or Waste Burners||AQM-1001C||AQM-1001C|
|Volatile Liquid Storage||AQM-1001D||AQM-1001D|
|Surface Coating or Printing Operations||AQM-1001E||AQM-1001E|
|Concrete, Asphalt, Aggregate, Feed, Flour & Grain||AQM-1001F||AQM-1001F|
|Metal Cleaning Degreasers||AQM-1001G||AQM-1001G|
|Metal Plating and Surface Treatment Operations||AQM-1001J||AQM-1001J|
|Stack Parameters and Air Pollution Control Equipment||AQM-1001K||AQM-1001K|
|Good Engineering Practice (GEP) Stack Height Determination||AQM-1001N||AQM-1001N|
|Compliance Monitoring Devices and Activities||AQM-1001X||AQM-1001X|
|Compliance Schedule for Noncomplying Emissions Units||AQM-1001Z||AQM-1001Z|
Right-click and download documents as needed. Please read the instructions for annual and semi-annual compliance certification reporting
|Form Name||WORD Version||PDF Version|
|Certified Progress Report||AQM-1001AA||AQM-1001AA|
|Annual Compliance Certification Form A||AQM-1001BB-A||AQM-1001BB-A|
|Annual Compliance Certification Form B||AQM-1001BB-B||AQM-1001BB-B|
|Annual Compliance Certification Form Table 1||AQM-1001BB-Table-1|
|Annual Compliance Certification Form Table 3||AQM-1001BB-Table-3|
|Annual Compliance Certification Form Table 4||AQM-1001BB-Table-4|
|Annual Compliance Certification Form Table 5||AQM-1001BB-Table-5|
|Annual Compliance Certification Form Table 6||AQM-1001BB-Table-6|
|Semi-Annual Report Table 1||AQM-1001DD-Table-1|
|Semi-Annual Report Table 2||AQM-1001DD-Table-2|
|Semi-Annual Report Table 3||AQM-1001DD-Table-3|
|Semi-Annual Report Table 4||AQM-1001DD-Table-4|
|Compliance Assurance Monitoring (40 CFR Part 64)||AQM-1001EE||AQM-1001EE|
|Minor Permit Modification Application||AQM-1001FF||AQM-1001FF|